Axis JS007WQK - Menu System - Recording Settings; Configure Rewriting and Formatting; Autoscan Channel Configuration

11
4. Press Ż or Źto select RECORD and press OK to enter.
• Press Ż or Źto select REWRITE/FORMAT and then press OK to enter the
setting accordingly. When the icons turn red, press Ż or Źon menu to
select. Press OK to exit the menu. At the submenu, press MENU to return to
main menu.
• REWRITE: When the disk is full, the monitor will delete the earliest manual/
timing record file one by one and continue recording.
• FORMAT: Micro SD card must be formatted before being used. All
documents in the TF card will be lost when the card is formatted.
5. Press Ż or Źto select AUTOSCAN and press OK to enter.