Axis JS007WQK User Manual

12
• Press Ż or Źto select CAM1/CAM2/CAM3/CAM4/SCANTIME and then
press OK to enter the setting accordingly. When the icons turn red, press
Ż or Źon menu for selection decreasing or adding. Press OK to exit the
menu. At the submenu, press MENU to return to main menu.
• If the channel is turned OFF, image of the corresponding camera will not
be shown in AUTOSCAN display mode.
• Setting scale of SCANTIME is 5-45S, the the step time of 5s.
6. Press Ż or Źto select SYSTEM and press OK to enter.
• TIME: Press Ż or Źto select TIME and press OK to set. Press Ż or Źfor
selection decreasing or adding. Press OK to continue the setting when
finishing the previous operation.
• COLOUR-SYS: Press Ż or Źto select COLOUR-SYS and press OK to enter.
Press Ż or Źto select NTSC/PAL.
• AUTO-DIM: Press Ż or Źto select AUTO-DIM and press OK to enter. Press
Ż or Źto select ON/OFF. When it is on, the monitor will automatically turn
darker when it is placed in a dark environment for 5s.
• ELECTRONIC DISTANCE LABEL: Press Ż or Źto select ELECTRONIC
DISTANCE LABEL and press OK to enter. Press Ż or Źto select ON/OFF,
to open or close the elctronic distance label. When it is on, the electronic
distance label will be displayed in back channel.

Axis JS007WQK Specifications

General

Brand	Axis
Model	JS007WQK
Category	Recording Equipment
Language	English