contact the product supplier for information
about how to dispose of this product correctly.
This product complies with the requirements of
Directive 2011/65/EU on the restriction of the use
of certain hazardous substances in electrical and
electronic equipment (RoHS).
China
This product complies with the
requirements of the legislative act
Administration on the Control of Pollution
Caused by Electronic Information Products
(ACPEIP).
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
www.axis.com
Support
Should you require any technical assistance,
please contact your Axis reseller. If your ques-
tions cannot be answered immediately, your
reseller will forward your queries through the
appropriate channels to ensure a rapid response. If
you are connected to the Internet, you can:
download user documentation and software •
updates
nd answers to resolved problems in the FAQ •
database. Search by product, category, or phrase
report problems to Axis support sta by logging •
in to your private support area
chat with Axis support sta (selected countries •
only)
visit Axis Support at www.axis.com/techsup•
Learn more!
Visit Axis learning center www.axis.com/
academy/ for useful trainings, webinars, tutorials
and guides.
English
Safety Information
Read through this Installation Guide carefully
before installing the product. Keep the Installa-
tion Guide for future reference.
Hazard Levels
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result in
minor or moderate injury.
Indicates a situation which, if not
avoided, could result in damage to
property.
Safety Instructions
The Axis product shall be used in compliance •
with local laws and regulations.
Store the Axis product in a dry and ventilated •
environment.
Avoid exposing the Axis product to shocks or •
heavy pressure.
Do not install the product on unstable brackets, •
surfaces or walls.
Use only applicable tools when installing the •
Axis product. Excessive force could cause dam-
age to the product.
Do not use chemicals, caustic agents, or aerosol •
cleaners.
Use a clean cloth dampened with pure water •
for cleaning.
Use only accessories that comply with technical •
specication of the product. These can be
provided by Axis or a third party.
Use only spare parts provided by or recom-•
mended by Axis.
Do not attempt to repair the product by yourself. •
Contact Axis support or your Axis reseller for
service matters.
Transportation
When transporting the Axis product, use the •
original packaging or equivalent to prevent
damage to the product.
Battery
The Axis product uses a 3.0 V BR/CR2032 lithium
battery as the power supply for its internal real-
time clock (RTC). Under normal conditions this
battery will last for a minimum of ve years.
Low battery power aects the operation of the
RTC, causing it to reset at every power-up. When
the battery needs replacing, a log message will
appear in the product’s server report. For more
information about the server report, see the
product´s setup pages or contact Axis support.
The battery should not be replaced unless
required, but if the battery does need replacing,
contact Axis support at www.axis.com/techsup
for assistance.
Risk of explosion if the battery is incorrectly •
To Next Page
Loading...
Need help?
General
