EasyManua.ls Logo

Axis M1025 User Manual

Axis M1025
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USERMANUAL
AXISM1025NetworkCamera

Other manuals for Axis M1025

Question and Answer IconNeed help?

Do you have a question about the Axis M1025 and is the answer not in the manual?

Axis M1025 Specifications

General IconGeneral
TypeIP security camera
PTZ controlYes
Placement supportedIndoor
Connectivity technologyWired
Form factorCube
Product colorWhite
Housing materialAluminum
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Supported video modes1080p, 720p
Video formats supportedH.264, MPEG4
Supported graphics resolutions320 x 240, 1920 x 1080 (HD 1080)
Angle of rotation180 °
Camera shutter speed1/8000 - 1/6 s
Minimum illumination1.5 lx
Sensor typeCMOS
Optical sensor size1/2.7 \
Optical zoom- x
Zoom capability-
Focus adjustment2.8
Password protection typeUser
Built-in HDDNo
Flash memory128 MB
Internal memory256 MB
Compatible memory cardsMicroSD (TransFlash), MicroSDHC, MicroSDXC
Maximum memory card size64 GB
Cabling technology10/100Base-T(X)
Supported network protocolsIPv4/v6, HTTP, HTTPS b, SSL/TLS b, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP ™, SNMPv1/v2c/v3 (MIB - II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS
InterfaceRJ-45
Ethernet LAN (RJ-45) ports1
Power source typePoE
Operating temperature (T-T)0 - 50 °C
Bundled softwareCamera Companion
Weight and Dimensions IconWeight and Dimensions
Depth45 mm
Width59 mm
Height118 mm
Weight144 g

Summary

Hardware Overview

Control Button

Describes the function of the control button for reset and service connection.

Accessing the Product

Access from a Browser

Steps to access the product via a web browser, including IP address entry.

Set the Root Password

Guides on setting the administrator password for initial access.

Setting Up the Product

Connecting Camera to a Monitor

Steps for connecting the camera to a monitor and initial setup.

Detectors

Motion Detection

Setting up motion detection zones and parameters for event triggers.

Events

Action Rule Triggers

Overview of events that can trigger actions, like motion or network loss.

System Options

Security

Managing user access, passwords, and network security settings.

Troubleshooting

Upgrading the Firmware

Steps to upgrade the product's firmware with new versions.

Emergency Recovery Procedure

Steps to recover the product if an upgrade fails.

Symptoms, Possible Causes and Remedial Actions

Troubleshooting common problems like IP address issues and login failures.

Related product manuals