Need help?Do you have a question about the Axis M1145 and is the answer not in the manual?
General| Type | - |
|---|---|
| PTZ control | Yes |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Form factor | Cube |
| Mounting type | Wall |
| Product color | White |
| Housing material | Aluminum |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, MPEG4 |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| White balance | Auto |
| Angle of rotation | 270 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/33500 s |
| Minimum illumination | 0.08 lx |
| Field of view (FOV) angle | 112 ° |
| Sensor type | CMOS |
| Optical sensor size | 1/2.9 \ |
| Optical zoom | - x |
| Focal length range | 3 - 10.5 mm |
| Security algorithms | HTTPS |
| Password protection type | User |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Maximum memory card size | 64 GB |
| LED type | IR |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | HTTP, HTTPS, SSL/TLS*, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, CIFS/SMB, SSH |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| DC output voltage | +3.3V |
| Power consumption | 50 mA |
| Power source type | PoE |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 6 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Minimum RAM | 256 MB |
Weight and Dimensions| Depth | 46 mm |
|---|---|
| Width | 75 mm |
| Height | 115 mm |
| Weight | 250 g |
Defines different levels of hazardous situations and their potential outcomes like death, serious injury, or property damage.
Guide on setting a secure root password for administrator access to the product.
Provides shortcuts to essential settings for initial product configuration and operation.
Configuring actions to be performed when specific events occur, like motion detection.
Defines conditions and actions for the product to perform, like recording or sending notifications.
Guides users through common problems, their causes, and recommended solutions for resolution.
To Next Page
