Need help?Do you have a question about the Axis M1125 and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Form factor | Box |
| Mounting type | Wall |
| Product color | White |
| Housing material | Polycarbonate (PC) |
| Total megapixels | 1 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 160 x 90, 1920 x 1080 (HD 1080) |
| White balance | Auto |
| Camera shutter speed | 1/143000 - 2 s |
| Minimum illumination | 0.05 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/2.8 \ |
| Optical zoom | - x |
| Focal length range | 3 - 10.5 mm |
| Security algorithms | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
| Password protection type | User |
| Built-in HDD | No |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP, SNMP v1/v2c/v3 (MIB - II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RT CP, ICMP, DHCP, ARP, SOCKS, SSH |
| Compliance industry standards | PoE IEEE 802.3af |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Power source type | PoE |
| Power consumption (max) | 5 W |
| Power consumption (typical) | 3.6 W |
| Operating temperature (T-T) | -20 - 50 °C |
| Operating relative humidity (H-H) | 10 - 85 % |
| Power source | PoE, DC |
Weight and Dimensions| Depth | 70 mm |
|---|---|
| Width | 44 mm |
| Height | 148 mm |
| Weight | 200 g |
Details on EMC requirements for radio frequency emission and immunity.
Compliance with IEC/EN/UL 60950-1 for IT equipment safety, cable routing, and grounding.
Power supply must meet SELV and LPS requirements per IEC/EN/UL 60950-1.
Explanation of DANGER, WARNING, CAUTION, and NOTICE levels for potential risks.
Step-by-step instructions for installing the AXIS M1124/M1125 Network Camera.
List of items included in the product package, including camera, stand, and printed materials.
Details of the RJ45 Ethernet connector with Power over Ethernet (PoE) capability.
Interface for external devices, digital output for relays/LEDs, and digital input for alarms.
2-pin terminal block for DC power input, requiring SELV/LPS compliant power source.
To Next Page
