AXIS M3011 Installation Guide Page 11
ENGLISH
Other methods of setting the IP address
This table shows alternative methods for setting or discovering the IP address. All methods are
enabled by default, and all can be disabled.
Note:
• UPnP™, DHCP and Bonjour are enabled by default in the AXIS M3011 Network Camera.
Use in operating
system
Notes
UPnP™
Windows When enabled on your computer, the camera is automatically
detected and added to “My Network Places.”
Bonjour
MAC OSX
(10.4 or later)
Applicable to browsers with support for Bonjour. Navigate to the
Bonjour bookmark in your browser (e.g. Safari) and click on the
link to access the camera’s web pages.
AXIS Dynamic DNS
Service
All A free service from Axis that allows you to quickly and simply
install your camera. Requires an Internet connection with no
HTTP proxy. See www.axiscam.net for more information.
ARP/Ping
All See below. The command must be issued within two minutes of
connecting power to the camera.
View DHCP server
admin pages
All To view the admin pages for the network DHCP server, see the
server’s own documentation.
To Next Page
Loading...
Need help?
General
