Need help?Do you have a question about the Axis M3085-V and is the answer not in the manual?
General| Resolution | 1920x1080 |
|---|---|
| Camera Type | Fixed dome |
| Day/Night Functionality | Yes |
| Ingress Protection | IP42 |
| Environment | Indoor |
| Sensor Resolution | 2 MP |
| Lens | Fixed |
| Focal Length | 2.8 mm |
| Aperture | F2.0 |
| Video Compression | H.264, H.265, Motion JPEG |
| IK Rating | IK08 |
| IR Sensitivity | No |
| Power over Ethernet | Yes |
| Edge Storage | microSD/microSDHC/microSDXC slot |
| Sensor Type | CMOS |
| Frame Rate | 30 fps |
| Ethernet | 10/100 |
Introductory section about the user manual content and scope.
Instructions and guidance for installing the camera device.
Initial steps to set up the device and access its web interface.
Recommendations for creating strong and secure passwords for device access.
Instructions for tailoring device settings to specific needs and environments.
Guides on optimizing image quality through various settings like exposure and noise reduction.
Steps for configuring video streaming, recording, and playback.
Methods to optimize video stream settings for lower bandwidth and storage usage.
Procedure for configuring network storage for saving video recordings.
Creating custom rules to trigger actions based on specific device events.
Navigating and utilizing the device's web-based user interface for management.
Configuration and best practices for securing the device and its network access.
Settings related to IP addressing, hostnames, and network connectivity.
Managing user accounts, privileges, and access control for the device.
Configuration of Session Initiation Protocol for making and receiving calls.
Setting up built-in detectors like camera tampering and audio detection.
Procedures for device maintenance, including restarting and firmware upgrades.
Guidance on diagnosing and resolving common device issues and problems.
Steps to restore the device to its original factory default configuration.
Factors affecting device performance, bandwidth, and frame rate.
Technical details and overview of the device's hardware and features.
Identification of physical components, connectors, and indicators on the device.
To Next Page
