Need help?Do you have a question about the Axis M3027-PVE and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| Placement supported | Outdoor |
| Connectivity technology | Wired |
| Form factor | Box |
| Product color | White |
| International Protection (IP) code | IP66 |
| Total megapixels | 5 MP |
| Maximum resolution | 2592 x 1944 pixels |
| Supported video modes | - |
| Video formats supported | H.264 |
| Camera shutter speed | 1/24000 - 2 s |
| Minimum illumination | 0.06 lx |
| Sensor type | CMOS |
| Optical sensor size | 1/3.2 \ |
| Optical zoom | - x |
| Built-in HDD | No |
| Flash memory | 128 MB |
| Internal memory | 512 MB |
| Compatible memory cards | SD, SDHC, SDXC |
| LED type | IR |
| Cabling technology | 10/100Base-T(X) |
| Power source type | PoE |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 4.5 W |
| Operating temperature (T-T) | -30 - 50 °C |
Weight and Dimensions| Weight | 740 g |
|---|
Defines different levels of potential danger and their consequences.
Details physical connectors, buttons, and LED indicators on the camera.
Instructions for accessing the camera's interface using a web browser.
Procedure for setting the initial administrator password for security.
Configuration and methods for streaming video using the H.264 codec.
Configures video stream parameters, including codecs, resolution, and frame rates.
Detailed configuration for H.264 and MJPEG video streaming codecs.
Detailed steps for configuring motion detection areas and sensitivity.
Using filters to ignore specific types of detected objects, e.g., swaying or small objects.
Defining conditions and actions for event-driven responses.
Available conditions that can initiate an action rule.
Available actions that can be performed when an event is triggered.
Accessing and filtering stored video recordings.
Exporting recordings as video clips in various formats.
Configuring user accounts, access levels, and security settings.
Enabling and configuring secure HTTPS connections for web access.
Basic IP address and TCP/IP settings for network connectivity.
Configuring DNS, NTP, host names, and IP address settings.
Managing SD cards and network shares for video storage.
Formatting and encrypting SD cards for secure storage.
Restoring the product to its original factory default configuration.
Steps for updating the product's firmware with the latest version.
Procedure to recover the product after a failed firmware upgrade.
Addressing common problems like IP address conflicts and login failures.
Troubleshooting issues related to storage devices and data management.
Factors affecting product performance, such as frame rate and bandwidth.
To Next Page
