Need help?Do you have a question about the Axis M3046-V and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| Certification | EN 55032 Class B, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A / B, ICES-003 Class B, VCCI Class B, RCM AS/NZS CISPR 22 Class B, KCC KN32 Class B, KN35, IEC/EN/UL 60950-1, IEC/EN 60529 IP42, IEC/EN 62262 Class IK08 |
| Languages support | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
| Number of languages | 10 |
| Placement supported | Indoor |
| Connectivity technology | Wired |
| Wide Dynamic Range (WDR) | Yes |
| Total megapixels | 4 MP |
| Maximum resolution | 2688 x 1520 pixels |
| Supported video modes | 720p, 1080p |
| Video compression formats | H.264, M-JPEG, MPEG4 |
| Supported graphics resolutions | 2688 x 1520, 320 x 240 |
| Sensor type | CMOS |
| Optical sensor size | 1/3 \ |
| Focus adjustment | 2.2 |
| Fixed focal length | 2.4 mm |
| Pan range | -177 - 177 ° |
| White balance | Auto |
| Tilt angle range | -65 - 65 ° |
| Angle of rotation | 352 ° |
| Camera shutter speed | 1/32500 - 1/5 s |
| Minimum illumination | 0.3 lx |
| Security algorithms | 802.1x RADIUS, HTTPS, SSH, SSL/TLS |
| Password protection type | User |
| Wi-Fi | No |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, SSL/TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, Bonjour, UPnP TM , SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Acrylonitrile butadiene styrene (ABS) |
| Protection features | Dust resistant, Water resistant |
| International Protection (IP) code | IP42 |
| Flash memory | 256 MB |
| Internal memory | 512 MB |
| Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
| Power source type | PoE |
| Power consumption (max) | 3.2 W |
| Power consumption (typical) | 2.8 W |
| Ethernet LAN (RJ-45) ports | 1 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 15 - 85 % |
| Bundled software | AXIS Camera Companion, AXIS Camera Station, Video management software |
Weight and Dimensions| Width | 101 mm |
|---|---|
| Height | 56 mm |
| Weight | 180 g |
How to locate and assign IP addresses to Axis devices on a network.
Steps to open the device's webpage and log in using a browser.
Instructions for setting a secure password for initial device access.
Recommendations for creating strong and secure passwords for the device.
Explains the different elements and controls visible on the device's web interface.
Details the different tabs available for configuring device settings via the webpage.
Guidance on optimizing image quality through various settings and modes.
Explains different exposure modes for adjusting image quality in various lighting conditions.
Steps to create privacy masks to obscure specific areas of the video feed.
Methods to minimize image noise in poor lighting environments.
Techniques for managing high dynamic range scenes with contrasting light.
Settings to enhance image detail, potentially increasing bitrate and reducing frame rate.
Methods to decrease bandwidth usage, potentially affecting image detail.
How to connect and display the camera's live stream on an external HDMI monitor.
Configuration steps for storing video recordings on a network server.
Instructions for initiating video recordings and accessing stored footage.
Creating rules for automated actions based on detected events like motion.
Setting up rules to define conditions and trigger specific camera actions.
Display custom text overlays on video feed upon motion detection.
Configure camera to record video triggered by motion detection events.
Cropped part of the full view for minimizing bandwidth and storage needs.
Resolution and frame rate settings affecting field of view and aspect ratio.
Superimposed information like timestamps or text on video streams.
Discusses video compression formats and their impact on network.
Explains how image, stream, and stream profile settings interact and affect streams.
Managing bandwidth consumption using variable or maximum bitrate settings.
Overview of the Axis Camera Application Platform (ACAP) for third-party analytics.
Details an analytic application for counting people in retail environments.
Steps to restore the product to its original factory default configuration.
Explains Axis firmware tracks (active vs. LTS) and their implications.
Procedure to verify the installed firmware version for troubleshooting.
Instructions for updating the device's firmware to the latest version.
Solutions for issues related to setting or accessing the device's IP address.
Troubleshooting steps when the device is unreachable via a web browser.
How to locate the device if its IP address changes dynamically.
Troubleshooting external access issues for the device.
Common issues related to video streaming, including multicast and rendering.
Factors affecting system performance like bandwidth, frame rate, and CPU load.
Visual identification of key components on the AXIS M3044-V and M3045-V/M3046-V models.
Explains the meaning of different status LED indications on the device.
Information and precautions regarding the use of microSD cards for storage.
Details the available connectors like HDMI and network ports on the device.
Description of the RJ45 Ethernet connector with Power over Ethernet (PoE) capability.
To Next Page
