Need help?Do you have a question about the Axis M3004-V and is the answer not in the manual?
General| Camera Type | Fixed Dome |
|---|---|
| Lens Type | Fixed |
| Ingress Protection | IP42 |
| Lens | 2.8 mm |
| Video Compression | H.264 |
| Power over Ethernet | Yes |
| Environment | Indoor |
| Frame Rate | 30 fps at 1920x1080 |
| Ethernet | 10BASE-T/100BASE-TX |
| Operating Conditions | Humidity 20 – 80% RH (non-condensing) |
Steps to access the product via a web browser.
Instructions to set the administrator root password.
Explains H.264 streaming methods like Unicast RTP and Multicast RTP.
Provides shortcuts for essential initial settings like Users, TCP/IP, and Date & Time.
Defines video stream settings like resolution, compression, and frame rate.
Predefined views for quick camera steering.
Generates alarms for camera repositioning or lens obstruction.
Generates alarms for movement in the camera view.
Steps to install and start an application.
Defines conditions and actions for automated events.
Lists and allows playback/download of recorded videos.
Manages user access, ONVIF, IP address filtering, and HTTPS.
Configures TCP/IP settings for IPv4 and IPv6.
Resets all settings to factory defaults.
Instructions for updating the product's firmware.
Lists common problems and their solutions.
To Next Page
