Need help?Do you have a question about the Axis M3014 and is the answer not in the manual?
General| Total megapixels | 1 MP |
|---|---|
| Maximum resolution | 1280 x 800 pixels |
| Video formats supported | H.264, M-JPEG |
| Minimum illumination | 1 lx |
| Sensor type | CMOS |
| Progressive scan | Yes |
| Optical sensor size | 1/4 \ |
| Effective sensor resolution | 1000000 pixels |
| Lens diameter | 2.9 mm |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4/v6, HTTP, HTTPS, QoS Layer 3 DiffServ, FTP, SMTP, Bonjour, UPnP, SNMPv1/v2c/v3(MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS |
| Power source type | PoE |
| Ethernet LAN (RJ-45) ports | 1 |
| Certification | EN 55022 B, EN 61000-3-2, EN 61000-3-3, EN 55024, FCC Part 15 Subpart B B, ICES-003 B, VCCI B, C-tick AS/NZS CISPR 22, MIC B, EN 60950-1 AXIS M3014: KCC B |
| Processor model | ARTPEC-3 |
| Placement supported | Indoor & outdoor |
| Mounting type | Ceiling |
| Flash memory | 128 MB |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Weight | 260 g |
|---|
Highlights superior image quality, intelligent video capabilities, and improved security.
Instructions for accessing the camera's web interface via a browser.
Procedure for setting the initial administrator password for security.
Guide to setting the root password securely using an HTTPS connection.
Description of controls and toolbars available on the Live View page.
Settings for resolution, frame rate, and compression for video streams.
Saving, recalling, and managing specific camera views.
Defining triggers and actions for various camera events.
Creating events based on specific triggers like motion or tampering.
Setting up motion detection windows and sensitivity levels.
Managing user accounts, passwords, and access privileges.
Basic TCP/IP settings including IPv4, IPv6, and DHCP.
Configuring DNS, NTP, host names, and NAT traversal.
Detailed procedure for resetting the camera to factory defaults.
Instructions for updating the camera's firmware to the latest version.
Checking firmware version and performing upgrades.
Steps to recover the camera if an upgrade process fails.
Lists common problems, their causes, and corrective actions.
To Next Page
