Need help?Do you have a question about the Axis M3205-LVE and is the answer not in the manual?
General| Model | M3205-LVE |
|---|---|
| Maximum Resolution | 1920 x 1080 |
| Image Sensor Size | 1/2.9" |
| Sensor Type | CMOS |
| Lens | Fixed |
| Lens Type | Varifocal |
| IR Illumination | Yes |
| Day/Night | Yes |
| Video Compression | H.264, MJPEG |
| Audio Support | Yes |
| Power over Ethernet | Yes |
| Impact Protection | IK10 |
| Type | Dome |
| Camera Type | Network camera |
| Environment | Outdoor |
| Resolution | 1920x1080 |
| Focal Length | 2.8 mm |
| Field of View Vertical | 56° |
| IR Range | Up to 30 m |
| Compression | H.264 |
| Power Source | PoE or DC |
| Operating Conditions | -30 °C to 50 °C (-22 °F to 122 °F) |
| Ingress Protection | IP66 |
| Field of View Horizontal | 103° |
| Ethernet Port | 10Base-T / 100Base-TX |
Details the steps required for installing the network camera.
Covers password protection and firmware security for device protection.
Settings for optimizing image quality, including exposure and night mode.
Techniques to improve image clarity in low-light conditions by reducing noise.
Configuring video streams, bandwidth reduction, and network storage.
Creating rules to trigger actions based on specific events.
Exploring Motion JPEG, H.264, and H.265 compression methods.
Managing bandwidth with Maximum and Average bitrate settings.
Procedures for resetting the device to its original factory settings.
Steps for upgrading the device firmware and potential issues.
Resolving IP address conflicts and browser access problems.
Managing live video playback, snapshots, and onscreen controls.
Settings for H.26x encoding, Zipstream, and bitrate control.
Choosing between standard, factory default, or autorollback firmware upgrades.
To Next Page
