Axis M4318-PLR - Page 16

AXISM43SeriesPanoramicCamera
Configureyourdevice
Createarule:
1.GotoSystem>Events>Rulesandaddarule.
2.Typeanamefortherule.
3.Inthelistofconditions,underI/O,selectSupervisedinputtamperingisactive.
4.Selecttherelevantport.
5.Inthelistofactions,underNotications,selectSendnoticationtoemailandthenselecttherecipientfromthelist.
6.Typeasubjectandamessagefortheemail.
7.ClickSave.
Triggeranalarmifsomeoneopensthehousing
Thisexampleexplainshowtotriggeranalarmifsomeoneopensthehousing.
Addarecipient:
1.GotoSystem>Events>RecipientsandclickAddrecipient.
2.Typeanamefortherecipient.
3.SelectEmail.
4.Typeanemailaddresstosendtheemailto.
5.Thecameradoesn’thaveit’sownemailserver,soitwillneedtologintoanotheremailservertobeabletosendmails.Fill
intherestoftheinformationaccordingtoyouremailprovider.
6.Tosendatestemail,clickTest.
7.ClickSave.
Createarule:
8.GotoSystem>Events>Rulesandaddarule.
9.Typeanamefortherule.
10.Inthelistofconditions,selectCasingopen.
11.Inthelistofactions,selectSendnoticationtoemail.
12.Selectarecipientfromthelist.
13.Typeasubjectandamessagefortheemail.
14.ClickSave.
Setuptheintrusionalarm
Usetheintrusionalarmswitchto,forexample,sendanoticationifsomeoneopensthecamerahousing.
Beforeyoustart
•Connecttheintrusionalarmswitchtopin1(ground)andpin3(digitalI/O)ofthecamera’sI/Oconnector.
Conguretheinputport
1.GotoSystem>Accessories>I/Oports.
16