Need help?Do you have a question about the Axis M4327-P and is the answer not in the manual?
Finding, accessing the web interface, and securing accounts with passwords.
Setting capture mode, mounting position, and power line frequency.
Adjusting camera level and straightening the horizon for image alignment.
Configuring exposure modes, zones, noise reduction, and motion blur.
Adjusting stream settings, compression, and bitrate control.
Resetting to factory defaults and upgrading firmware.
Resolving issues with IP, access, streaming, and performance.
Finding, accessing the web interface, and securing accounts with passwords.
Setting capture mode, mounting position, and power line frequency.
Adjusting camera level and straightening the horizon for image alignment.
Configuring exposure modes, zones, noise reduction, and motion blur.
Adjusting stream settings, compression, and bitrate control.
Resetting to factory defaults and upgrading firmware.
Resolving issues with IP, access, streaming, and performance.
General| Model | Axis M4327-P |
|---|---|
| Type | Network Camera |
| Pan/Tilt/Zoom | Digital PTZ |
| Day/Night Functionality | Yes |
| Ingress Protection | IP66 |
| Vandal Resistance | IK10 |
| Image Sensor | Progressive Scan RGB CMOS |
| Video Compression | H.264, Motion JPEG |
| Frame Rate | Up to 30 fps |
| Audio Compression | AAC-LC, G.711, G.726 |
| Network Protocols | IPv4, IPv6, HTTP, HTTPS, FTP, SMTP, SNMP, DHCP, NTP, UPnP |
| Application Programming Interface | VAPIX® |
| Analytics | Video motion detection, Audio detection |
| Memory | microSD/microSDHC/microSDXC card slot |
| Power | Power over Ethernet (PoE) IEEE 802.3af, 12 V DC |
| Network Interface | 10/100 Ethernet |
| Operating Conditions | -20 °C to 50 °C |
To Next Page
