Axis P1245 User Manual

AXISP1245NetworkCamera
Aboutevents
-Videosourceconnected–Triggertherulewhenasensorunitisconnectedtoordisconnectedfromthemainunit.
•Hardware
-Network–Triggertheruleifnetworkconnectionislostorrestored.Thiscanforexamplebeusedtostart
recordingtotheSDcard.
•InputSignal
-ManualTrigger–TriggertheruleusingtheManualTriggerbuttonintheLiveViewpage.SeeAboutthe
controlsintheliveviewwindowonpage11.Thiscanforexamplebeusedtovalidateactionsduringproduct
installationandconguration.
-VirtualInputs–canbeusedbyaVMS(VideoManagementSystem)totriggeractions.Virtualinputscan,for
example,beconnectedtobuttonsintheVMSuserinterface.
•Storage
-Disruption–Triggertheruleifstorageproblemsaredetected,forexampleifthestoragedeviceisunavailable,
removed,full,lockedorifotherreadorwriteproblemsoccur.Thiscanforexamplebeusedtosendmaintenance
notications.
-Recording–TriggerstherulewhentheAxisproductrecordstothestoragedevice.Therecordingstatustrigger
canbeusedtonotifytheoperator,forexamplebyashingLEDlights,iftheproducthasstartedorstoppedto
recordtothestoragedevice.Notethat,thistriggercanbeusedonlyforedgestoragerecordingstatus.
•System
-SystemReady–Triggertherulewhentheproducthasbeenstartedandallservicesarerunning.Thiscanfor
examplebeusedtosendanoticationwhentheproductrestarts.
•Time
-Recurrence–Triggertheruleperiodically.SeeHowtosetuprecurrencesonpage28.Thiscanforexamplebe
usedtouploadanimageevery5minutes.
-UseSchedule–Triggertheruleaccordingtotheselectedschedule.SeeHowtocreateschedulesonpage28.
Aboutactions
Youcancongureseveralactions:
•OverlayText–Displayanoverlaytext.SeeHowtoincludeoverlaytextinanactionruleonpage21.
•RecordVideo–Recordvideotoaselectedstorage.
•SendImages–Sendimagestoarecipient.
•SendNotication–Sendanoticationmessagetoarecipient.
•SendSNMPTrap–SendanSNMPtrapmessagetotheoperator.MakesurethatSNMPisenabledandcongured
underSystemOptions>Network>SNMP.
•SendVideoClip–Sendavideocliptoarecipient.
•StatusLED–FlashtheLEDindicator.Thiscanforexamplebeusedtovalidatetriggerssuchasmotiondetectionduring
productinstallationandconguration.
Howtoaddrecipients
Theproductcansendmedialesandmessagestonotifyusersaboutevents.Beforetheproductcansendmedialesornotication
messages,youmustdeneoneoremorerecipients.Forinformationaboutavailableoptions,seeAboutrecipienttypesonpage27.
26

Axis P1245 Specifications

General

Type	IP security camera
Placement supported	Indoor
Connectivity technology	Wired
Number of cameras	1
Mounting brackets included	Yes
Storage temperature (T-T)	-40 - 65 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	10 - 85 %
Sensor type	CMOS
Optical sensor size	1/3 \
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Power source type	PoE
Power consumption (max)	4 W
Power consumption (typical)	2.5 W
Form factor	Covert
Mounting type	Ceiling/Wall/Desk
Product color	White
Housing material	Plastic, Steel
Networking standards	IEEE 802.3af, IEEE 802.3at
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4/v6, HTTP, HTTPS , SSL/TLS , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH
Security algorithms	802.1x RADIUS, HTTPS
Camera shutter speed	1/32500 - 1/25 s
Minimum illumination	0.22 lx
Maximum resolution	1920 x 1020 pixels
Supported video modes	1080p
Video compression formats	H.264
Supported graphics resolutions	1920 x 1080 (HD 1080)
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	109 mm
Width	46 mm
Height	16.5 mm
Weight	72 g