Axis P135 Series - User Manual

Configuration guide  Mechanical PTZ configuration on the AXIS P135X cameras
Rev: 1.1, Last updated: 02/04/2013 1
Configuration guide
Mechanical PTZ configuration on
the AXIS P135X cameras
This document shows how to configure AXIS P135X cameras to control primarily
a PT head and optionally a zoom lens.
1 Configuration steps
Follow the below configuration steps after connecting the PT head to RS-485/RS-422 serial port
of the camera. Connection schemes are available for particular PT head on driver support pages.
General pin assignment is as follows:
Function
Pin
Notes
RS-485/RS-422 Tx (A)
1 (Tx+)
Tx pair for RS422 and 4-wire
RS-485
RS-485/RS-422 Tx (B)
2 (Tx-)
RS-485A alt. RS-485/RS-422
Rx (A)
3 (Rx+/Tx+ alt Rx+).
Rx pair for all modes
(combined Rx/Tx for 2-wire
RS-485)
RS-485B alt. RS-485/RS-422
Rx (B)
4 (Rx-/Tx- alt. Rx-)

Axis P135 Series Specifications

General

Day and Night	Yes
Minimum illumination	0.5 lux
Compression	H.264
Audio Support	Yes
Audio compression	AAC
Security	Password protection, IP address filtering, HTTPS encryption
Network protocols	IPv4, IPv6, HTTP, HTTPS, RTSP, RTP, TCP, UDP, SMTP, FTP
Ethernet	10/100 BASE-T
Power over Ethernet	IEEE 802.3af
Power	PoE or 12 V DC