Do you have a question about the Axis P1364 and is the answer not in the manual?
Sensor type | CMOS |
---|---|
Progressive scan | Yes |
Optical sensor size | 1/3 \ |
Bundled software | AXIS Camera Companion, AXIS Camera Station |
Number of cameras | 1 |
Focal length range | 2.8 - 8.5 mm |
Camera shutter speed | 1/28000 - 2 s |
Minimum illumination | 0.1 lx |
Form factor | Bullet |
Mounting type | Desk |
Product color | White |
Housing material | Zinc |
Lens mount interface | CS mount |
Type | IP security camera |
Certification | EN 55022 Class A, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-003 Class A, VCCI Class A, C-tick AS/NZS CISPR 22 Class A, KCC KN22 Class A, KN24, IEC/EN/UL 60950-1 |
Languages support | CHI (SIMPL), DEU, ENG, ESP, FRE, ITA, JPN, KOR, POR, RUS |
Number of languages | 10 |
Placement supported | Indoor & outdoor |
Connectivity technology | Wired |
Maximum resolution | 1280 x 960 pixels |
Supported video modes | 720p |
Image quality adjustment | Brightness, Colour depth, Contrast |
Video compression formats | H.264, M-JPEG, MPEG4 |
Audio system | 2-way |
Voice codecs | G.711, G.726 |
Alert notification type | |
Password protection type | - |
Wi-Fi | No |
Networking standards | IEEE 802.1x, IEEE 802.3af, IEEE 802.3at |
Ethernet interface type | Fast Ethernet |
Supported network protocols | IPv4/v6, HTTP, HTTPSa , SSL/TLSa , QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnP™, SNMPv1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, SFTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SSH |
Flash memory | 256 MB |
Internal memory | 512 MB |
Compatible memory cards | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
Power source type | PoE |
Power consumption (max) | 7.4 W |
Power consumption (typical) | 4.1 W |
Power consumption (Power over Ethernet (PoE)) | 4.3 W |
Operating temperature (T-T) | 0 - 55 °C |
Operating relative humidity (H-H) | 10 - 85 % |
Depth | 78 mm |
---|---|
Width | 205 mm |
Height | 46 mm |
Weight | 630 g |
Details about physical connection ports and buttons on the camera.
Explains the status and network LED indicators and their meanings.
Instructions for accessing the product's interface via a web browser.
Steps to set the initial administrator password for secure access.
Overview of the main interface for viewing and controlling the camera.
Configuration options for video stream settings like resolution and compression.
Adjustments for color saturation, brightness, sharpness, and contrast.
Manages user access, IP filtering, and HTTPS for secure operation.
Configuration for TCP/IP settings, DNS, NTP, and network protocols.
Manages SD card settings, formatting, encryption, and network shares.
Addresses common issues encountered when assigning an IP address.
Details about the image sensor, lens, and illumination specifications.