EasyManua.ls Logo

Axkid Kidzone - Adjust the seat belt

Axkid Kidzone
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
the strap. When installing in the front seat the
strap has to be attached under the seat.
Pull out the strap(1) to an appropriate
length. Secure the fastening device in the loop
of the car or the strap. Repeat on the other side.
Tighten the straps by rmly pulling the end
strap.
Unfold the support leg (2) to its maximal
angle. Pull the latch on the upper length ad-
juster (3) and pull down the leg so that it gets
in contact with the cars oor. If the leg still can-
not reach the oor, repeat on the bottom length
adjuster (3).
Now you could try tormly pull the straps
to make sure that your seat is fully secured.
If you have mounted the child seat in the
rear seat of the car, move the front seat to a com-
fortable location. e seats backside can, but
must not, have contact with the car seat.
Adjust the seat belt
Place the child in the child seat. Place the
childs arms in between the shoulder straps so
that the shoulder straps are hanging over the
chest and stomach of the child. Put together the
shoulder belts and fasten the buckle between
the childs legs. Pull the adjustment strap (4).
is will tighten the belt and the headrest will
automatically slide down to the proper height.
To loosen the belt, hold down belt adjustment
and pull both belts.
1
2
4
3
2

Related product manuals