8
Forward facing with seatbelt
Fixed installation of seat
Make sure the seat’s tilt is in its
0-position. If not, hold the adjust-
ment lever for its angle (1) change the
chair until it stands straight up.
Place your Kidzone on the seat.
Pull the car’s safety belt and place the
shoulder strap into belt guide(2) on
the upper side of the seat. en pull
the belt straight vertically down, on
the backside, to the nearest hole in
the backseat (3). Lap section of the
belt is simultaneously pulled up and
guided into the same hole as shoul-
der belt. Bring the belts through the
hole, across the front of the chair and
then back through the second hole
(3). Pull both belts horizontally across
the side on the chair and then down.
Fasten seat belts in the belt buckle and
secure it with the lock-o(4). Please
make sure that the belts hasn’t tangled
up or been folded anywhere.
Also make sure that both shoulder
and lap belt is securely fastened every-
where. Use your own weight to press
down the chair in order to automati-
cally fasten the seat belt further.
Never use the child seat in a car seat where
airbag hasn’t been disabled.
Continued on next page
3
2
4
1
Step 0
Step 1
Step 2
To Next Page
Loading...
