- -
17
STORAGE(30 days or longer)
□ CLEANING Thoroughly clean the machine exterior.
□ INSPECTION Inspect the entire machine and tubes for
damage, including loose or missing components, and repair
as necessary.
□ FUEL Drain the fuel tank, and the clear the carburetor and
lines by running the machine until it stops from lack of fuel.
□ LUBRICATION Remove the spark plug, and then pour
approximately 1/4-oz of oil into the cylinder through the
spark plug hole. Before reinstalling the spark plug, pull the
recoil starter 2 to 3 times to distribute the oil over the
cylinder walls.
□ AIR CLEANER Remove, clean, and reinstall the filter
element as described under .
To Next Page
Loading...