1.5 Identification of article
The MP20s are labelled with a part number. A standard unit operates in the UHF band at
419/409 MHz Rx/Tx, and will be labelled MP20-00U or MP20-01U for single band and MP20-
02DB-414 for the dual band. Other frequency combinations may be configured at customer
request and will be labelled MP20-00U-xxx or MP20-01U-xxx for single band and MP20-
02DB-xxx for dual band, where xxx denotes the centre frequency of the antenna.
Note: Some early units deviate from the product numbering scheme and a combination of the
product number and the antenna label must be used to identify the customer configuration.
Note: Some customer configured units deviate from the product numbering scheme and use
MP20-00U-xxx, were xxx represent an alphanumeric customer id. For those units the
combination of Tx and Rx is found in the datasheet supplied with the unit.
To Next Page