11
AXM140BT OPERATION
Bluetooth
®
Operation
Making a Phone Call
• Press once. "Enter Phone Number" will be shown, then
an "_" will appear on the display.
• Using the remote control, enter the phone number using
the 0-9 buttons. Press on the remote control or
unit's front panel to begin dialing.
Note: Placing a phone call from your cell phone will also use
the Bluetooth function of the unit.
• Press SELECT from Bluetooth mode to view the 10 most
recent phone calls that were dialed, received or missed
while connected to the unit.
• Turn the volume knob to cycle through the recent phone
numbers. Press SELECT or to dial the phone number.
To redial the last phone number, press two times from
Bluetooth mode. Press again to redial the phone number.
Manual Dialing
Recent Calls List
Last Number Redial
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the display
and a ring tone will be heard.
Note: The volume of the ring tone depends on the volume
level of the unit. The incoming ring tone may not be heard if
the volume is set to a low level or mute is activated.
• Press to receive the incoming phone call.
• Press to refuse the incoming phone call.
Note: If Auto Answer is set to ON in the setup menu, all
phone calls will be received automatically.
During an active phone call, press to end a phone call.
If the phone call was received when listening to music in
another mode, the unit will resume the previous mode.
Receiving a Phone Call
Ending a Phone Call
To Next Page
Loading...
