Axxera XDCPA10BT - Preparation and Installation; Pre-Installation Procedures; Mounting and Viewing Angles

5
XDCPA10BT OPERATION
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it
would be subject to dust, dirt or excessive vibration.
Preparation
LEFT/RIGHTVIEWOFSCREEN
TRIM RING
MOUNTING SLEEVE
MOUNTING RELEASE KEY
* Use 2 or 3 screws to affix the monitor to the bracket.