Need help?Do you have a question about the Ayre MX-R and is the answer not in the manual?
Proper placement and airflow for the amplifier to avoid overheating.
Connecting the amplifier to an unswitched wall outlet for operation.
Using balanced inputs for achieving the highest sound quality.
Recommended speaker cable termination for best performance with output terminals.
Using two-line telephone cords with RJ-11 connectors for AyreLink connections.
Connecting linked components sequentially in a chain.
Front panel button and LED for mode selection and status indication.
Automatic control of linked audio components via AyreLink.
Turning on the amplifier and linked system components.
Powering down individual or all linked components.
Adjusting the brightness level of displays on linked components.
Recommended hours of music playback for optimal performance.
Setting the status LED brightness via configuration mode.
Using external components to control amplifier operation.
Key performance metrics including wattage and input impedance.
Audio bandwidth and amplification level specifications.
Energy usage and physical size of the amplifier unit.
Causes, indicators, and protective measures for amplifier overheating.
Identifying and addressing blown internal power supply fuses.
Response to low or absent AC power conditions.
Recognizing and resolving DC offset faults for loudspeaker protection.
Meaning of steady LED states: Green, Blue, Orange.
Interpretation of flashing LED patterns: Red and Violet.
Terms, duration, and transferability of the product warranty.
Steps for making a warranty claim and required documentation.
To Next Page
General
