AYRSTONE AyrMesh Hub2T User Manual

®
®
1
Start Here
Quickstart Guide - AyrMesh
®
Hub2T
Check the contents of the box:
- Hub2T
- Antenna
- Mounting Bracket
- Power Supply
- Power Cord
- (2) Ethernet Cables
- (2) Zip Ties (not shown)
- (2) Hose clamps (not shown)
- Coaxial sealing tape (not shown)
MAC Address
Write down the MAC address
of your Hub, write it here, and
keep it in a safe place:
If you don't have one,
sign up for an account
on AyrMesh.com
Use a computer connected
to the same router to which
you're connecting the Hub!
Turn over for one-page "Ultra uickStart" Instructions.
Please visit http://support.ayrstone.com for detailed instructions,
videos, slide shows, and a troubleshooting guide.
00:11:22:33:44:55
POE LAN
®
NOTE: All Hubs must be "initialized" by connecting
to AyrMesh.com to download their conguration
information before use.
00:C0:

AYRSTONE AyrMesh Hub2T Specifications

General

Brand	AYRSTONE
Model	AyrMesh Hub2T
Category	Network Hardware
Language	English

Summary

Start Here

Assemble the Hub and attach to router

Make sure the Hub is working

Hub Status Check

Monitor the Hub's connection status and signal lights on AyrMesh.com to ensure it is operational.

Finish the Installation

Mounting the Hub

Mount the Hub outdoors, high and clear, to a flat surface or pole using provided hardware.

Weatherproofing Connections

Install the bottom gland and cover for weather-tight connections, ensuring a drip loop.

Signal Lights on the Hub

Gateway Hub Signal Lights

Explains the meaning of the top signal, Ethernet activity, and power lights on Gateway Hubs.

Remote Hub Signal Strength

Interprets signal lights on Remote Hubs to indicate signal strength to the nearest Hub.

Using the AyrMesh Hub

Connecting to Hub's WiFi

Connect your computer or device to the Hub's WiFi access point and enter the default encryption passkey.

Security Best Practices

Change the default encryption passkey and SSID on AyrMesh.com for network security.

Troubleshooting

Gateway Hub Troubleshooting

Addresses issues like no Ethernet light, Hub not appearing in DHCP, or failure to check into AyrMesh.com.

Remote Hub Troubleshooting

Covers problems like no signal lights, slow network, or poor signal strength for Remote Hubs.