To Next PageTo Next Page
Need help?Do you have a question about the AYRSTONE AyrMesh Hub2x2 and is the answer not in the manual?
General| Frequency Bands | 2.4 GHz, 5 GHz |
|---|---|
| Maximum Wireless Speed | 300 Mbps |
| Dimensions | 4.25 x 4.25 x 1.25 in (108 x 108 x 32 mm) |
| Operating Temperature | -40 to 70°C (-40 to 158°F) |
| Power Input | 12VDC, 1A |
| Maximum Data Rate | 300 Mbps |
| Wireless Standard | 802.11n |
| Power Supply | 12VDC |
| Ports | 2 x Ethernet, 1 x Power |
| Weight | 0.23 kg |
Lists the items included in the AyrMesh Hub2x2 quickstart kit, such as the Hub, antennae, power supply, and cables.
Instructs users to find and record the Hub's MAC address from the device for future reference.
Guides users on attaching the antennae to the Hub and opening the bottom door to access ports.
Details connecting the Hub to the power supply and then the power supply to the router using Ethernet cables.
Explains how to verify the Hub's online status and connectivity via the AyrMesh.com portal.
Describes the meaning of the signal lights on the Hub during the check-in process.
Guides on mounting the Hub outdoors at a high, clear location, using screws or zip ties.
Details connecting the final Ethernet cable to the Hub's correct port for communication.
Explains the importance and method of creating a drip loop for water protection.
Describes the specific indicator lights for Gateway Hubs and their meaning.
Explains the indicator lights for Remote Hubs based on signal strength.
Guides on selecting the AyrMesh WiFi network and entering the default passkey.
Discusses how network configuration changes on AyrMesh.com affect the Hubs.
Provides steps to resolve issues where the Hub or power supply shows no lights.
Offers solutions for signal lights continuously running or the Hub failing to appear on AyrMesh.com.
Addresses problems with connecting to the Wi-Fi signal, including SSID/passkey issues.
Explains how to troubleshoot network instability after adding an AyrMesh device.
