Aysix Technologies 2000CE - Test Mode

14
Test Mode
This mode of operation allows the user to perform basic test functions to aid in troubleshooting. There
are a total of 13 tests which may be performed.
Operation of the TEST MODE proceeds as follows. From the Main Menu use the arrow keys to move
the cursor to the TEST option, then press the “ENTER” key. Use the arrow keys to select the desired test,
and then press the “ENTER” key.
View Sensor 1 Data
following channel 1 sensor data is displayed: sensor type, sensor serial number, sensor reporting
mode, and sensor raw data. Press the MENU key to exit.
View Sensor 2 Data
following channel 2 sensor data is displayed: sensor type, sensor serial number, sensor reporting
mode, and sensor raw data. Press the MENU key to exit.
View Sensor Clk
View Sensor Clk displays the power line frequency which is used to filter the sensor data. Press the
MENU key to exit.
Cal Analog 1
Cal analog 1 will cause the analyzer to generate full scale output of 20mA on analog output 1. Use
the UP and DOWN arrows keys to adjust the output, then press the ENTER key to save.
Cal Analog 2
Cal analog 2 will cause the analyzer to generate full scale output of 20mA on analog output 2. Use
the UP and DOWN arrows keys to adjust the output, then press the ENTER key to save.
Test Relay 1
Test Relay 1 displays the current status of relay 1. To toggle relay 1, press the "ENTER" button. The
new status of relay 1 will be displayed. To exit, press the "MENU" key.
Test Relay 2
Test Relay 2 displays the current status of relay 2. To toggle relay 2, press the "ENTER" button. The
new status of relay 2 will be displayed. To exit, press the "MENU" key.
Test Relay 3
Test Relay 3 displays the current status of relay 3. To toggle relay 3, press the "ENTER" button. The
new status of relay 3 will be displayed. To exit, press the "MENU" button.
Clean Relay (Relay #4)
Test Clean Relay displays the current status of relay 4. To toggle relay 4, press the "ENTER" button.
The new status of relay 4 will be displayed. To exit, press the "MENU" button.
This test is intended primarily to aid the Aysix technical support engineers in troubleshooting. The
This test is intended primarily to aid the Aysix technical support engineers in troubleshooting. The