After the installation of these scripts, go to the All Apps, where the
Arduino IDE is installed.
Almost all operating systems come with a text editor preinstalled (for
example, Windows comes with Notepad, Linux Ubuntu comes with
Gedit, Linux Raspbian comes with Leafpad, etc.). All of these text
editors are perfectly fine for the purpose of the eBook.
Next thing is to check if your PC can detect an Atmega328p board. Open
freshly installed Arduino IDE, and go to:
Tools > Board > {your board name here}
{your board name here} should be the Arduino/Genuino Uno, as it can
be seen on the following image:
- 9 -
To Next Page
Loading...