Azbil MC9-01L3 B03 Series - User Manual

2018-07 R10 １
174-297j
MICRON-LUB LUBRICATION UNIT
MC9 series
Instruction manual
［NOTE］
･The contents of this document might
change without notice.
･Copying or reprinting this document without
permission is prohibited.
Azbil TA Co., Ltd. http://atc.azbil.com
TACO Co., Ltd. changed its name to Azbil TA Co., Ltd. on April 1, 2013.
9-27-9 Takashimadaira, Itabashi-ku, Tokyo TEL：03-3936-2311
Tokyo Office
:Tel 03-3936-2311
Chubu Office
:Tel 052-322-1631
Kita-Kanto Office
:Tel 048-556-9511
Kansai Office
:Tel 06-6302-7730
Shizuoka Office
:Tel 082-261-5231
Chugoku Office
:Tel 082-261-5231
Please read the “Terms and Conditions” from the
following URL before ordering or use.
http://atc.azbil.com/en/products/en_kiyaku.html

Summary

2. Specifications

4. Operation

Graphical Diagram of MC9 Lubrication Unit

Presents a visual schematic of the MC9 unit, labeling its main functional components and connections.

5. Installation and Handling

5-1. Installations

Instructions for securely mounting the MC9 unit, ensuring correct orientation and stability.

5-2. Connection of Air Preparation Equipments for Supply Air

Details on connecting clean, dry compressed air and required air preparation components.

5-5. Manifold Piping

Remarks for Piping Work of Branching Pipe

6. Electrical Wiring

CAUTION

Important safety warning regarding the use of external timers and the necessity of user-prepared control circuits.

Operation Control of PV Solenoid Valve for Pump Operation (Wiring Example)

Illustrates a typical wiring example for controlling the pump's solenoid valve using a timer.

Setting Example of Timer (Flicker Motion)

Terminal Numbers and Electrical Equipments

Mechanical Micro Switch type Pressure Switch

NPN type Electronic Pressure Switch

PNP type Electronic Pressure Switch

2. In Case of Models with Electrical Control Circuit

7. Handling & Adjustment

7-1. Oil Replenishment

Details the process for refilling the oil reservoir and critical precautions during replenishment.

7-2. Air Supply

Explains the steps for connecting compressed air and adjusting the regulator for optimal operation.

7-3. Adjustment of Operating Pressure and Manifold Pressure

Guides on setting operating and manifold pressures for efficient lubrication and cooling.

7-4. Operation of Oil-Shot Pump and Confirming of Oil Dripping

7-5. Method of Setting of Oil-Shot Frequency

Operation of Oil Feed Monitor

Operation of Oil Drip Monitor

Concerning Setting and Adjustment of the Timer

7-6. Operation of MC9 Units with Electrical Control Circuit

(1) Operation and Alarming of MC9 Units with Oil Drip;Feed Monitor (with Control Circuit)

Details operation and alarms for MC9 units equipped with monitoring devices.

NOTE: Abnormal Operation Detection and Handling

Critical note on detecting and handling abnormal pump operation and alarms.

(2) Operation and Alarming of MC9 Units without Oil Drip;Feed Monitor (with Control Circuit)

(3) Alarming of Abnormality and Cancelling Alarming Signal

7-8. Oil Replenishment

7-9. Operation of Warning Equipment

8. Maintenance & Checking

Daily Maintenance Items

Periodical Inspection & Maintenance

Checks and Processing of Oil Drain

9. Some Questions in Use of MC9 Units

12. Electrical Circuit Diagram of MC9 Units with Circuit Board

Azbil MC9-01L3 B03 Series Specifications