To Next PageTo Next Page
Need help?Do you have a question about the Azbil MC9 Series and is the answer not in the manual?
General| Series | MC9 Series |
|---|---|
| Category | Lubrication systems |
| Operating / Ambient Temperature | 0 to 40°C |
| Control Method | Timer control |
| Lubricant | Oil |
| Drive Method | Electric motor |
Key features of the Micron-Lub lubrication system.
Lists various MC9 model numbers and their associated specifications.
Details various components and options that form the model number codes.
Explains how pressure switch settings are represented in model number codes.
Guidelines for physically mounting and securing the MC9 unit.
Details on connecting compressed air preparation equipment.
Instructions for connecting the drain line for condensate.
How to install the oil drain valve at the bottom of the oil tank.
Proper methods for setting up manifold piping for oil distribution.
Identifies terminal blocks and associated electrical components for wiring.
Specific wiring instructions for MC9 units equipped with electrical control circuits.
Steps for filling the oil reservoir and ensuring proper lubrication.
How to adjust the air supply pressure for optimal unit operation.
Guidance on setting operating and manifold pressures for the unit.
How to operate the oil shot pump and verify oil delivery.
Procedures for setting the oil shot frequency for the pump.
How to operate MC9 units that include electrical control circuits.
How to handle and cancel abnormality alarms during operation.
Methods for measuring oil drip quantities and overall consumption.
Detailed steps for refilling the oil reservoir.
How to interpret and respond to warning signals from the equipment.
Routine checks to be performed daily for proper operation.
Scheduled inspections and maintenance tasks for long-term reliability.
Procedures for checking and managing oil drains.
Addresses issues where oil does not drip after the pump begins operation.
Covers additional problems and their troubleshooting steps.
Steps for manually adjusting the sensitivity of the oil drip monitor.
How to input remote sensitivity adjustments for the oil drip monitor.
Descriptions of regulators, solenoid valves, filler plugs, and fittings.
Descriptions of pressure switches, level switches, and oil monitors.
Descriptions of the pump mechanism and venturi nozzle.
