1ª 10155 ES 9 - 2009
15
7. RF Emitter - Receiver
It is used to control the access of minors to the machine.
The owner of the machine, at the petition of the user,
activates the machine with a remote control so the user
may purchase the cigarettes.
For the Receiver to recognise a new Emitter, the following hast to be carried out:
1. With the machine switched on, hold and press button 1 of the receiver and the LED diode will
flash.
2. Press button 2 on the Emitter. Now the receiver is registered to the frequency that comes
from the Emitter and it is shown by switching on the LED diode for two seconds.
3. The process finished when you release button 1 on the Receiver.
To Next Page
Loading...
