1ª 10155 ES 9 - 2009
39
3.1.2. Loading the hopper with coins
The Hopper U is auto refilling, it refills automatically with the coins that are inserted by the users
of the machine. There may be times when it is necessary to reload them with coins. There are
three ways to reload. The two first register the coins in the accounting the machine, the number
of coins, and their value. The third method does not. The explanation that follows explains the
three methods:
1. Remove the Hopper U that needs reloading and introduce the coins. Then using the
programming function number 004 LLEN.MAN.DEV you “inform” the machine of the
number of coins introduced. If you do it like this, the machine registers this in its
accounting, the number of coins introduced in the Hopper U-II and their value.
2. Introduce the coins in the slot in front plate for the coin entry. Then, using the button
A on the programming handset, enter the “Programming mode” and, using the button
C of the programming handset, exit to “working mode”. If you do this, the machine
registers the number of coins introduced in each one of the Hoppers U-II and their
value in its accounting.
3. Remove the Hopper U-II and introduce the coins desired. If it is done like this, the
machine will not register anything in its accounting.
3.1.3. Loading the Channels with product
You can sell practically all the packets of cigarettes that on sale in the market. You can also vend
lighters in the channel with the lighter Kit.
With the configuration of machine that leaves of the factory, the different formats of packets of
cigarettes that can be sold are indicated in the following table:
To Next Page
Loading...
