1ª 10155 ES 9 - 2009
7
6. Fit the cable ties (ref. 09717030) that
corresponds to the door.
7. Place the MDB wiring loom
(ref.43210320) in the cable ties. Pass it
through the hole in the door.
8. Remove the black cable tie cover and route
the cables as indicated in the figure.
9. Continue routing the cable as shown by
passing and fixing the cable with the cable
ties as indicated in the figure.
10. Remove the black cable tie cover and route
the cables as indicated in the figure.
To Next Page
Loading...
