Aztec GEM II - Operational Guide

www.aztecmedical.co.uk
2
Operational Guide
1. SelectandmountappropriatecungdiscforGEMIIringcuer.Move
 ‘lockingswitch’tolockposion.Insertcorrectlyloadedbaerycasseein
 toGEMIIbody.
2.Applyagenerousquantyofwaterbasedgeltoringsurface.
3. Slidengerguardunderring.
4. InsertGEMIIguidearmdiscintongerguardguideblock.Restcungdisc
 onringsurface.AcvatemotorallowingtheweightoftheGEMIIcung
 headalonetoprovidethenecessarydownwardpressureontothecung
 disc.
5. MoveGEMIIbackandforthalongguideblocksothatcung 
disctraversestheenrewidthofthering.Asuddenincrease 
inrotaonspeedindicatesringhasbeencutthrough.
6. Ifpaentwarnsofheatbuild-upstopcungimmediately, 
cleangelfromringsurfaceandre-applyfreshgelandconnue 
withcungprocess.
7. UseGEMIIringspreaderpliersorforcepstoremovering.
Foramoredetaileddemonstraonofthe
cungprocesswatchthe
GEMIIBaeryPoweredRingCuerDVD