Aztec GEM II - Troubleshooting and Faqs

www.aztecmedical.co.uk
8
Guarantee
Trouble Shooting & F.A.Q’s
TROUBLE SHOOTING
Motorfailstooperate
Motorstallsduringcung
Cungdiscmakeslileprogressincung
throughring
Check baeries are loaded into the baery
cassee correctly.
Check that retaining springs in baery cas-
see are sound and holding baeries rmly
in place.
Check baeries are in a charged condion.
Check that ‘Lock’ switch on GEM II unit is
not engaged.
Operator applying excessive force during
cung process.
Baeries are depleted, change for fully
charged baeries.
Wrong disc selected for ring metal type
 • UseDiamondcungdisc
  (Ref.A-Z223)forhardmetalsi.e.
  Iron,Steel,Planum.
 • UseCarbidecungdisc
  (Ref.A-Z224)forsometalsi.e.
  Gold,Silver,Copper.
Disc is badly worn, change for new disc
Diamondcungdisc(Ref.A-Z223)
Tocheckifdiscisworn,runngeraround
cungdiscedge.Ifsmoothtotouchthe
diamondgritiswornaway,replacedisc.