U s e r M a n u a l 10
5. Under WAN Connection
a. Select Connection Type
b. Input VPI and VCI on the required field.
(Note: Please refer to your Internet Service Provider for the information needed on
the required field).
6. Under Wireless
a. Tick WLAN Enabled box to enable the wireless interface.
b. Tick Broadcast SSID to broadcast Wireless Name.
c. SSID input the Wireless Name on the required field.
d. Tick WPA/WPA2 Enabled to enable the wireless security
e. Passphrase input the Wireless SSID on the required field.
7. Click the Apply button to save the settings.
To Next Page
Loading...
