Aztech HIPC700 User Manual

User Manual
Page 18 of 43
Step 4
To confirm if the connection was established, check the LEDs. The Power LEDs and the
Powerline Activity LEDs on all HomePlugs are on.
If the Powerline Activity LED on HomePlug Z is off, this means the pairing was unsuccessful.
You have to repeat steps 1 to 3 again until all LEDS in all Homeplug AV devices are on .

Aztech HIPC700 Specifications

General

Brand	Aztech
Model	HIPC700
Category	IP Camera
Language	English