Setting the time
press “CLOCK” botton to set the time. The time displayed blinks, press “CLOCK” botton again
and then use the arrow " " and " " to change the hour setting. To change the minutes,
press “CLOCK” botton again. Once the correct time is set. press “CLOCK” botton again the end.
The display returns to normal after 8 seconds.
Timer switch ON and Timer switch OFF:
Once the time has been set correctly, this function allows a machine start time and a machine stop
time to be programmedduring the day.
Press “TIMER ON” botton the time displayed and “ON” to blink, press “TIMER ON” botton again
Change the hour using the " " and " " keys. Press “TIMER ON” botton again to change
the minutes using the " " and " " keys. Press “TIMER ON” botton again the end.
Press “TIMER OFF” botton the time displayed and “OFF” to blink, press “TIMER OFF” botton
again Change the hour using the " " and " " keys. Press “TIMER OFF” botton again to
change the minutes using the " " and " " keys. Press “TIMER OFF” botton again the end.
The time setting is from 0 to 24 hours to recycle.
When the setting time for on and off is the same,the setting time is not available.
When the setting timer, Press “CLOCK” to deactivate TIMER.
Key lock:
Press "SET" and " " 5 seconds to set keylock.
Press "SET" and " " 5 seconds again to release keylock.
To Next Page
Loading...
Need help?
General
