To Next PageTo Next Page
Need help?Do you have a question about the AZURO GAR PF30L and is the answer not in the manual?
General| Brand | AZURO |
|---|---|
| Model | GAR PF30L |
| Category | Water Filtration Systems |
| Language | English |
Normal filtration, water circulates via pump and filter sand back to the pool. Used for pool vacuum cleaner.
Washing filter sand when pressure is 70 kPa above initial. Run until clear water comes out of the waste pipeline.
Rinsing filter after washing for 10-20 seconds to settle sand and remove dirty water from valve interior.
Bypass of the filtration vessel for reducing pool water level or emptying the pool. Moves impurities directly to waste pipeline.
Water circulation outside the filter vessel with filter sand. Used for faster dissolution of pool chemicals.
Closes water flow from pump to filter. Never switch on the pump in this valve position.
Drain filter vessel water, store drain plug. Turn valve control to intermediate/open position to drain valve.
Diagnosing and resolving issues related to reduced water flow or excessive pressure buildup in the filter system.
Addressing slow filtration rates and the need for more frequent cleaning or maintenance of the filter system.
Troubleshooting issues where the swimming pool water quality is not being maintained effectively by the filtration unit.
