Need help?Do you have a question about the AZURO PASRW015-P-AI and is the answer not in the manual?
General| Model | PASRW015-P-AI |
|---|---|
| Brand | AZURO |
| Category | Swimming Pool Heater |
| Heating Capacity | 15 kW |
| Refrigerant | R32 |
| Water Connection | 50 mm |
| Type | Air Source Heat Pump |
| Heating power | 15 kW |
| Power Supply | 230V/50Hz |
Details the key features of the heat pump unit, including durability, installation flexibility, quiet operation, and advanced control.
Covers essential safety guidelines for installation, operation, storage, and handling of the heat pump unit, including warnings and user responsibilities.
Provides crucial warnings and guidelines regarding unit repair, electrical safety, and compliance with directives like WEEE and RoHs.
Presents detailed performance metrics for the heat pump unit, including capacity, power input, and COP at different temperatures.
Provides the physical dimensions of the PASRW015-P-AI and PASRW020-P-AI models, including length, width, and height.
Illustrates the typical installation setup for connecting the heat pump unit to the pool's water circulation system.
Guidance on selecting an optimal outdoor location for the heat pump unit, considering factors like fresh air and electricity access.
Discusses optimal distance from the pool and plumbing requirements, including pipe size and bypass arrangements.
Explains the electrical wiring requirements, including connection to a dedicated power supply and circuit protection.
Provides a step-by-step procedure for the initial startup of the heat pump unit after installation.
Describes the functions and components of the wire controller, including the LED display and control buttons.
Instructions on how to turn the unit on/off and set the desired target temperature using the wire controller.
Explains how to switch operating modes and how to lock/unlock the wire controller's keyboard.
Details how malfunction codes are displayed and lists key operational parameters with their default and adjustable values.
Provides a table listing common malfunctions, their display codes, causes, and recommended solutions.
Illustrates the PCB layout and explains the purpose of each connection terminal for internal wiring.
Guidelines for checking the work area for cleanliness, ventilation, and potential hazards before maintenance, ensuring refrigerant safety.
Emphasizes avoiding ignition sources, ensuring ventilation, and checking equipment condition and electrical safety during maintenance.
Details procedures for working on electrical components, sealed parts, and detecting flammable refrigerants safely.
Instructions for checking cabling condition and methods for detecting flammable refrigerants using appropriate equipment.
Covers safe procedures for refrigerant removal, evacuation, recovery, and proper equipment labelling.
Provides step-by-step guidance for safely decommissioning the unit and charging the system with refrigerant.
Provides specifications for single and three-phase unit cables, including wire size, MCB, and creepage protector ratings.
Presents a table comparing saturation temperatures for refrigerants R410A and R32 at various pressures.
To Next Page