B-TEK Scales T405S - User Manual

AWT35-501638
Issue AA
T405S
Weight Indicator
Service Manual

Summary

1 General Information and Warnings

1.2 Installation

Covers torque specifications for mounting and proper grounding of cables.

1.3 Routine Maintenance

Instructions for routine maintenance, cleaning, and training procedures.

2 Introduction

2.2 Powering Up the T405 S

Explains the power supply options and requirements for the T405S indicator.

2.3 Using the Alphanumeric Keypad

Provides guidance on using the alphanumeric keypad for menu entries and data input.

3 Introduction to the Menus

3.1 Accessing the Menus

Step-by-step guide on how to access the indicator's menus using passwords.

4 User Level Menus

4.1 User Menu

Covers setting time, date, site ID, and viewing archive information.

5 Diagnostics Level Menus

5.1 Diag Menu

Used to check and verify indicator performance through diagnostic tests.

6 ADMIN Level Menus

6.1 Setup Menu

Provides access to submenus for configuring scale operation parameters.

7 Communication Port Protocols

8 Option Cards

8.1 Analog Output Card

Describes the analog output card providing analog output proportional to weight.

8.2 Current Loop;RS485;RS422 Card

Provides Current Loop/RS485/RS422 communication to connected devices.

8.3 USB Device Option Card

Provides connection for a USB host device, creating a Virtual COM Port.

10 Print Formatting

10.1 Print Format Editor

10.2 Editing an Existing Print String

10.3 Inserting Tokens, etc.

11 Print Tokens, Parameters and Default Print Formats

11.2 Firmware Tokens

11.3 Network Tokens

13.4 T405 S Jumper and Switch Settings

13.5 T405 S Remote Inputs and Outputs, Opto-22 Module

13.6 STVS (Severe Transient Voltage Suppressor) Installation

13.9 Keypad Overlay Replacement Procedure

13.9.2 Process to Remove and Replace the Keypad Overlay

B-TEK Scales T405S Specifications

General

Brand	B-TEK Scales
Model	T405S
Category	Accessories
Language	English