B.Well PRO-35 - User Manual

Questions and Answers

I
ishortAug 9, 2025
Why does my B.Well PRO-35 Blood Pressure Monitor LCD display show abnormal results?
- J
  justinmcgrathAug 9, 2025
  An abnormal result on the LCD display of your B.Well Blood Pressure Monitor may be due to several reasons: the cuff was not correctly positioned or properly tightened (apply the cuff correctly and try again); incorrect body posture during testing (review the “BODY POSTURE DURING MEASURE- MENT” sections of the instructions and re-test); speaking, arm or body movement, or being angry, excited, or nervous during testing (re-test when calm and without speaking or moving during the test); or irregular heartbeat (arrhythmia) - in this case, it is inappropriate for people with serious arrhythmia to use this blood pressure monitor.
T
Tina FarrellAug 19, 2025
What to do if B.Well Blood Pressure Monitor shows abnormal result?
- R
  riverakellieAug 19, 2025
  If your B.Well Blood Pressure Monitor displays an abnormal result, consider the following potential causes and solutions: Ensure the cuff is correctly applied and properly tightened. Review the instructions regarding correct body posture during measurement and re-test. Remain calm, still, and silent during the test. Note that this monitor is not suitable for individuals with serious arrhythmia.
E
Elizabeth WuAug 28, 2025
How to fix abnormal result on B.Well PRO-35 Blood Pressure Monitor?
- J
  James HansenAug 28, 2025
  To address an abnormal result on your B.Well Blood Pressure Monitor, check these points: Make sure the cuff is correctly positioned and tightly secured. Refer to the instruction manual’s section on proper body posture during measurement and try again. Avoid talking or moving during the measurement, and ensure you are calm. Note: This device is not recommended for individuals with serious arrhythmia.

Summary

2. Important Information on the Subject of Blood-Pressure and Its Measurement

2.2. Classification of blood pressure values

Categorizes blood pressure readings based on ESH guidelines and advises medical consultation.

4. Intended Use

5. Contraindication

6. Precautions

7. Setup and Operating Procedures

7.1. Battery loading

7.2. Using a mains adapter

7.3. Connecting the cuff to the monitor

7.4. Applying the cuff

7.5. Carrying out a measurement

Provides guidance on preparing for and performing a blood pressure measurement.

7.6. Taking your blood pressure reading

Step-by-step instructions for taking a blood pressure measurement using the device.

7.7. Pulse Arrhythmia Detection

7.11. Technical alarm description

7.12. Troubleshooting (1)

Provides solutions for common error messages and abnormal results shown on the LCD.

7.13. Troubleshooting (2)

Offers solutions for specific LCD error codes related to battery and pressure system issues.

8. Maintenance

9. Specifications

12. Warranty Information

B.Well PRO-35 Specifications

General

Measurement Method	Oscillometric
Type	Upper Arm
Display Type	LCD
Cuff Size	22-42 cm
Inflation	Automatic
Accuracy (Pressure)	±3 mmHg
Accuracy (Pulse)	±5% of reading
Irregular Heartbeat Detection	Yes
WHO Blood Pressure Classification Indicator	Yes
Device Type	Automatic Blood Pressure Monitor
Measurement Range (Pulse)	40-200 beats per minute