B.Well PRO-35 - 13 Electromagnetic Compatibility Information

Instruction for use
22
En
PRO-33 / PRO-35
13. ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer’s declaration – еlectromagnetic emissions
The PRO-33 / PRO-35 is intended for use in the electromagnetic environment specifi ed below.
The customer or the user of the PRO-33 / PRO-35 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment-guidance
RF emissions
CISPR 11
Group 1
The PRO-33 / PRO-35 uses RF energy only for its internal function. Therefore, its RF emis-
sions are very low and are not likely to cause any interference in nearby electronic equip-
ment.
RF emissions
CISPR 11
Class B
The PRO-33 / PRO-35 is suitable for use in all establishments, including domestic establish-
ments and those directly connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fl uctuations/
fl icker emissions
IEC 61000-3-3
Complies