B2 Audio SLD5K - Design Features

Design features
Circuit Configuration: HI-EF Class D
Frequency Response: 10 Hz ~ 350 Hz
Signal to Noise Ratio: > 100 dB
Input Sensitivity: 6 V ~ 0.2 V
Crossover Circuit: 24 dB / Octave
Low Pass Crossover: 35 Hz ~ 250 Hz
Subsonic Crossover: 10 - 50 Hz
Phase shift:
Damping Factor: > 350
0 - 180 degrees
Bass Boost Frequency: 30 Hz ~ 90 Hz
Bass Boost: 0 ~ 9 db
Remote Control: Included
Power Terminal Gauge: 0 GA x 2
Fuse Rating: 500A
Dimensions: 9.84’’ x 2.28’’ x 25.59’’ / 250 mm x 58 mm x 650 mm
Specifications
Continious output power (RMS)
(12 V < 1% THD) (14.4 V <1% THD) (14,4 V < 1% THD) (16 V < 1% THD) (18 V < 1% THD)
Description of specifications
Stable impedance load of the SLD5K is 1 Ohm.
*SLD5KL is a regulated version of the SLD5K, power output is 3000 W at 14.4 V, though at 18 V performance is the same as SLD5K
* Speaker overload
* Short circuit
* Input Voltage - RCA & Power Supply
3
SLD5k
sld5kl
Operaonal voltage: 10 V ~18 V. Operaonal voltage will also be affected by the load of the amplifier
Power @ 4 Ω: 750 W x 1 750 w x 1* 1250 W x 1 1300 W x 1 1325 W x 1
Power @ 2 Ω: 1500 W x 1 1500 w x 1* 2500 W x 1 2600 W x 1 2650 w x 1
Power @ 1 Ω: 2500 W x 1 3000 w x 1* 5000 W x 1
5200 W x 1 5300 w x 1