b2 electronic PDTD60-2

Need help?

Do you have a question about the b2 electronic PDTD60-2 and is the answer not in the manual?

Summary

Safety

General Safety

Work Safety

Details safety precautions related to electric shock hazards and procedures.

Operator Qualifications

General Description

Technical Specifications

Lists technical specifications for PD30-E, PD60-2, PD90-2, PD120-2 models.

PC Software

Explains remote control via b2 Suite software, communication cables, and testing capabilities.

PD Test Setup

PD30-E Test Setup -> PD Measurement

Illustrates the test setup for PD measurement using the PD30-E unit.

Procedure for PD30-E Test Setup

Provides step-by-step instructions for connecting and setting up the PD30-E for testing.

PDTD-2 Setup -> PD Measurement

Illustrates the test setup for PD measurement using PDTD-2 CC and PD-2 Filter.

Procedure for PDTD-2 Setup - PD Measurement

Provides step-by-step instructions for connecting and setting up PDTD-2 for PD measurement.

PDTD-2 Setup -> PD and TD Measurement

Illustrates the test setup for PD and TD measurement using PDTD-2.

Procedure for PDTD-2 Setup - PD and TD Measurement

Provides step-by-step instructions for setting up PDTD-2 for PD and TD measurement.

PDTD-2 Setup -> PD and TD Measurement with extension cable (and leakage current Correction)

Illustrates the test setup with an extension cable and leakage current correction.

Procedure for PDTD-2 Setup -> PD and TD Measurement with extension cable

Details the procedure for setting up PDTD-2 with an extension cable and leakage current correction.

PDTD-2 Setup -> PD Measurement (no leakage current correction)

Illustrates the test setup for PD measurement without leakage current correction.

Procedure for PDTD-2 Setup -> PD Measurement (no leakage current correction)

PDTD-2 Setup -> PD Measurement - Extension between Filter and CC

Procedure for PDTD-2 Setup -> PD Measurement - Extension between Filter and CC

PDTD-2 Setup -> PD Measurement - Using Guard Compensation

Procedure for PDTD-2 Setup -> Using Guard Compensation

PDTD200-2 Setup -> PD Measurement

Procedure for PDTD200-2 Setup -> PD Measurement

PD Calibrator Test Setup

PD Calibration Setup

Disconnection Procedure

Explains the procedure for safely disconnecting the test setup, emphasizing electrical hazards.

Disconnection Failure

Details precautions and procedures when errors or power loss occur during testing.

PDTD-2 Disconnection with Failure

PDTD-2 Disconnection -> PD Measurement

Illustrates the disconnection process for PD measurement using PDTD-2.

PDTD-2 Disconnection