b2 electronic PD30-E - User Manual

PD Family
PD30-E | PDTD60-2 | PDTD90-2 |
PDTD120-2 | PDTD200-2
User Manual
ENGLISH
DHV0088 Rev02
b2 electronic GmbH
Riedstrasse 1
6833 Klaus
Austria
T +43 (0) 5523 57373
F + 43 (0) 5523 57373-5
www.b2hv.com
info@b2hv.com
Subject to alterations -
errors excepted
Illustations are not binding.
ZERTIFIZIERT
TÜV AUSTRIA CERT GMBH
EN ISO 9001
ZERTIFIKAT NR. 20 100 92003758

Summary

Documentation Conventions

Safety Messages

Symbols

Safety

General Safety

Safety Precautions and Hazards

Details electric shock hazards, authorized personnel, radiation hazards, and equipment handling.

Appropriate Applications

Operator Qualifications

Partial Discharge Unit

Technical Specifications

PC Software

Operation Modes

Test Modes

Output Modes

PD Test Setup

PD30-E Test Setup

Diagram and procedure for setting up PD30-E for PD measurement.

PDTD-2 Setup -> PD Measurement

PDTD-2 PD Measurement Procedure

Step-by-step instructions for connecting PDTD-2 for PD measurement.

PDTD-2 Setup -> PD and TD Measurement

PDTD-2 PD and TD Measurement Procedure

Step-by-step instructions for connecting PDTD-2 for PD and TD measurement.

PDTD-2 Setup -> PD and TD Measurement with Extension Cable

PDTD-2 Setup Procedure with Extension Cable

Step-by-step for PDTD-2 setup with extension cable and leakage current correction.

PDTD-2 Setup -> PD Measurement (No Leakage Correction)

PDTD-2 Setup Procedure without Leakage Correction

Step-by-step for PDTD-2 setup without leakage current correction.

PDTD-2 Setup -> PD Measurement - Extension between Filter and CC

PDTD-2 Setup Procedure with Filter-CC Extension

Step-by-step for PDTD-2 setup with extension between Filter and CC.

PDTD-2 Setup -> PD Measurement - Using Guard Compensation

PDTD-2 Setup Procedure with Guard Compensation

PDTD200-2 Setup -> PD Measurement

PDTD200-2 Setup Procedure

Step-by-step for PDTD200-2 setup for PD measurement.

PD Calibrator Test Setup

PD Calibration Setup Procedure

Disconnection Procedure

Disconnection Failure

PDTD-2 Disconnection with Failure Procedure

PDTD-2 Disconnection -> PD Measurement

PDTD-2 Disconnection Procedure

Step-by-step guide for disconnecting PDTD-2 after PD measurement.

Instrument Care

b2 electronic PD30-E Specifications

General

Voltage Resolution	0.1 kV
Voltage Range	0.5 - 30 kV
PD Level	0.1 pC to 100 nC
Frequency Range	30 Hz to 300 Hz
PD Resolution	0.1 pC
Measurement Range	0.1 pC to 100 nC
Resolution	0.1 pC
Test Frequency	30 Hz to 300 Hz
Test Voltage	0.5 - 30 kV
Operating Temperature	50 °C
Power Supply	50 Hz / 60 Hz