b2 electronic PD30-E - Operation Modes; Test Modes; Output Modes

General Description
© b2 electronic GmbH DHV0088 36
3.9 Operation Modes
The following describes the scope of each PD operation modes: Test Modes, Output Modes (Waveform) and Data Transfer
Modes.
3.10 Test Modes
ThePDTDunitscanbeoperatedin“Manual”or“Automatic”mode(remotecontrolledwiththeb2SuiteSoftware).
For detailed procedure, see DHV0048 b2 Suite Manual.
3.11 Output Modes
AC (VLF) Symmetrical and load independent across full range
DC (plus or negative polarity)