ENGLISH
7
7
OPERATIONS
1 - Turn on the scale. Press key to choose the weighing or counting functions.
8
COUNTING MODE
1 - After entering into counting mode, press the key to select the sample size.
NOTE
10, 20, 50, 100, 200, 500, 1000 pcs.
2 - Put the sample number on the scale and press key.
When the symbol” c” disappears the sampling procedure is nished and you can start to use the counting
function.
If the unit weight is too small (less than 0.2 or 0.04d of a scale division), the display will show “ –or –
pcs”.
9
ACCUMULATION FUNCTION
In weighing or counting mode, make it to zero, place the goods.
1 - After the display is stable, press the key to enter into accumulation mode.
2 - After accumulation, total accumulated weight and total accumulation times are shown in display
window in turn.
3 - In accumulation mode, press the key to return to operation mode.
Clear accumulation
Press the key, meanwhile also press the key to clear the memory of accumulation.
Accumulation error !
When the total accumulation time is more than 99 times or the total accumulated weight is more than the
display range, the scale will give you error message, at the same time, the current operation is useless
!
To Next Page
