B3C Serenite 9260(A) - Calibration; Calibration with Unknown Weight; Calibration with Known Weight

8
FUNCTIONS
www.b3c-pesage.fr
9260(A) - 9360
10
CALIBRATION
WITH AN UNKNOWN WEIGHT
1 - Turn on scale.
2 - During the scale in self-testing, press the, and keys about 3 seconds.
3 - When the display shows “CC” to put on the pan the same asked weight mass.
When the display is stable press the key . Auto calibration is nished.
WITH AN KNOWN WEIGHT
1 - Turn on scale.
2 - During the scale in self-testing, press the, and keys about 3 seconds.
3 - When the display shows “CC”, to change the gure, use the key to move
and to select the new calibration value.
Put on the pan the weight mass.
Press the, key to conrm. Auto calibration is nished.
ERROR MESSAGE
When the display is shown E1.E2.E5.OL message, please
send the scale back to your dealers for repair
!